Loading 3D Model...
3D Printed
6.5" Front Door Speaker Pods ā Isuzu NP75 Truck
Serious Sound for Your Work Truck
The Isuzu NP75 was built to work, not to entertain ā but that does not mean you have to put up with terrible audio on long hauls. These 3D-printed speaker pods bolt straight onto the front door panels, and with a simple hole cut, give you the ability to install proper deep-mount 6.5" aftermarket speakers. Built tough enough for a truck that works as hard as you do.
Isuzu NP75 Truck
Fits Isuzu N Series NP75 trucks. Bolts directly onto front door panels. Requires a hole to be cut in the door skin for speaker clearance. Accepts deeper 6.5" aftermarket speakers.
Why NP75 Owners Choose These Speaker Pods
Direct Bolt-On
Bolts straight onto the factory door panel ā no fabrication or custom brackets needed.
Deep 6.5" Speaker Mount
Designed to accept deeper 6.5" speakers that the factory door could never fit.
ABS Plastic Construction
Durable, impact-resistant ABS plastic built to handle the demands of a working truck.
Designed in Perth, Australia
Engineered and 3D-printed locally at our Wangara workshop for precise fitment.
Built to Handle the Aussie Climate
Every pod is 3D-printed from ABS plastic ā a tough, impact-resistant thermoplastic known for its durability in automotive applications. ABS holds up well under heat, vibration, and the day-to-day rigours of life in a commercial vehicle.
The pods arrive in a clean matte black finish, unpainted and ready to install straight out of the box. If you prefer a colour-matched look, ABS accepts paint well ā a light scuff and a coat of plastic-adhesion primer is all you need.
Installation
Remove the factory door panel trim from the front doors.
Bolt the speaker pod directly onto the door panel.
Cut a hole in the door skin for speaker clearance.
Mount your 6.5" speaker into the pod, wire it up, and refit the door panel.
Important Notes
- Speakers not included ā This listing is for the speaker pods only. 6.5" speakers sold separately.
- Hole cut required ā A hole needs to be cut in the door skin for speaker clearance.
- Unpainted finish ā Pods arrive in matte black ABS. Paintable with proper preparation.
- Sold as a pair ā Includes two speaker pods for both front doors.
ā ļø Note: Installed photos show pods wrapped in vinyl ā pods are supplied unwrapped in raw ABS plastic.
SpecificationsNeed a Custom Bracket or Solution?
Get in touch at sales@ozaudioshop.com ā we design and print from our Perth workshop in Wangara.
FAQ
No ā all brackets come straight off the printer UNPAINTED in matte black ASA plastic. They can be painted by the customer to match your vehicle colour if desired.
No ā wiring is not included. You will need to source your own wiring loom to connect the lights.
All our 3D printed parts are made from ASA (Acrylonitrile Styrene Acrylate) plastic. ASA is UV-resistant, heat-resistant, and significantly more durable than standard ABS or PLA plastics. It's the same material used in automotive exterior components.
Orders are typically dispatched within 1-3 business days. Delivery times vary by location. Perth metro pickup is available from Oz Audio Wangara.
Related Products
New
70 Series Landcruiser Dash Tweeter Pods
New
LC200 Tailgate Light Bracket
New
07-15 LC200 Rear Work Lights Brackets | Landcruiser Reverse Lights Brackets
New
PY-RA Next Gen Ranger Driver's Cup Holder Replacement Switch Panel
New
150 Prado Rear Work Lights Brackets | Prado Reverse Lights Brackets
New
Next Gen Ranger / Raptor Tub Lights Brackets
New
LC200 Rear Work Lights Brackets | Landcruiser Reverse Lights Brackets
Tweeter Brackets ā Holden Commodore VE (2006ā2013)
6.5" Rear Speaker Spacers - Holden Commodore VT VX VY VZ
6.5" Front Speaker Spacers - Holden Commodore VT VX VY VZ
Tweeter Pods ā Suzuki Jimny JB74 (2018+)
Tweeter Brackets ā Nissan NP300 Navara & Y62 Patrol
Tweeter Brackets ā Holden Commodore VT VX VY VZ (1997ā2006)
Tweeter Pods ā Isuzu D-Max & MU-X (2012+)
6x9 to 8" Speaker Spacers - Toyota Prado 150 & LC200 (2009+)
6.5 to 8" Speaker Spacers - Toyota Hilux (2015+)
6x9 to 8" Speaker Spacers - Ford Ranger PY (2022+)
New
Fortuner Rear Work Lights Brackets
New